What factors should hardware accessories pay attention to when manufacturing? from Sanqian's blog

The processing method of hardware accessories first needs to depend on the technical requirements of the surface of the parts to be processed. It should be noted that these technical requirements are not necessarily the requirements specified on the part drawings, and sometimes it may be due to technological reasons. This aspect is higher than the requirements on the process drawings. What factors do hardware accessories need to pay attention to when manufacturing, let hardware accessories exporters take you to understand.

For example, because the benchmarks do not overlap, the surface processing requirements of hardware accessories are increased, or they are used as precision benchmarks to put forward higher processing requirements. The required final processing method, and determine the processing method that requires several processes. The selected part processing method should meet the requirements of the quality of the parts, good processing economy, and improved efficiency. Therefore, when choosing the hardware accessories processing method, it needs to be considered The following factors:

1. The machining accuracy and surface roughness that can be obtained by any hardware accessories processing method have a relatively large range, but knowledge is economical in some narrower ranges, and the machining accuracy in this range is relatively economical Therefore when selecting the processing method, the corresponding processing method that can obtain economical processing accuracy should be selected;

2. The material composition of hardware accessories needs to be considered;

3. The structure, shape, and size of hardware accessories need to be considered;

4. It is necessary to consider the requirements of production efficiency and economy. In mass production, high-efficiency advanced technology should be adopted, and even the manufacturing method of the blank can be fundamentally changed, which can reduce the amount of movement of precision machining;

5. It is necessary to consider the existing processing equipment and technical conditions of the hardware Accessories exporter. When choosing the processing method, the existing manufacturing equipment should be fully utilized, the potential of the enterprise should be tapped, and the enthusiasm and creativity of the workers should be brought into play, but continuous improvement should also be considered. The existing processing methods and equipment use cutting-edge technology to improve the technological level.

The above is the processing method of hardware accessories introduced by hardware accessories exporter, Sanqian Technology sells a variety of hardware accessories, such as folded copper fin, and corrugated fin, welcome to contact us!