© Copyright Our Wall
essential oil distiller with steam generator, also known as sandwich steam generator, is widely used in candy, pharmaceutical, dairy, wine, pastries, preserves, beverages, canned, stewed meat and other food processing, can also be used in large restaurants or cantons soup, cooking, stew, porridge, etc. It is a good equipment for food processing to improve quality, shorten time and improve working conditions.
essential oil distiller with steam generator use precautions
essential oil distiller with steam generator is a sandwich pot made of stainless steel material, essential oil distiller with steam generator heat source is the use of a certain pressure of steam or the use of electric heating, in the heating area and thermal efficiency have been improved, and heating is also very uniform, heating speed and temperature easy to master.
When using essential oil distiller with steam generator, we should pay attention not to use steam pressure in excess of rated working pressure for a long time. When using essential oil distiller with steam generator, the intake valve should be opened slowly to the required pressure, if the inlet water outlet is equipped with a trap, the valve should always be open; Adjust the safety valve according to the user's own steam pressure; Always pay attention to the change of the steam pressure of essential oil distiller with steam generator, and adjust with the intake valve at any time; essential oil distiller with steam generator After the intake stops, open the straight cock to release the residual water.
essential oil distiller with steam generator https://www.hzzjde.com/Essential_oil_extraction/74.html
application of central dust collector Because the filter material is folded into a cylinder, the filter material layout density is large, so the dust removal mechanism is compact and the volume is small; The height of the filter cartridge is small, the installation is convenient, and the maintenance workload is small; The filter area of the same volume dust collector is relatively large, the filter wind speed is small, and the sniper is not big; Filter material folding requires strict sealing at both ends and no air leakage, otherwise it will affect the dust removal effect. The filter drum type dust collector is composed of air inlet pipe, air exhaust pipe, box, ash hopper, ash cleaning device, filter barrel and electric control device. The filter cylinder in the dust collector arrangement is very important, the filter cylinder can be vertically arranged in the dust collector box flower plate, can also be inclined arranged on the flower plate, fixed with bolts, and with rubber pads, the lower part of the flower plate is divided into filter chamber, the upper part is divided into clean gas chamber, the filter cylinder treatment is fixed with bolts, the convenient method is automatic locking device and rubber compression device, these two methods, It is convenient for installation and maintenance. The tilt Angle of the dust hopper should be fixed according to the rest Angle of the dust, and generally should not be less than 60 degrees. The discharge valve of the cartridge dust collector should be tight. The height of the clean air chamber of the filter should be convenient for the installation and maintenance of the pulse injection device.
The structure of the central dust collector is composed of an air inlet pipe, an air exhaust pipe, a box, a ash hopper, a ash cleaning device, a diversion device, an air flow distribution plate, a filter cartridge and an electronic control device, which is similar to the dust removal structure of an air box pulse bag. The arrangement of the filter cylinder in the dust collector is very important, which can be vertically arranged on the box flower plate or tilted on the flower plate, and the vertical arrangement is more correct from the ash cleaning effect. The lower part of the flower plate is the filter chamber, and the upper part is the air box pulse chamber. An air flow distribution plate is arranged at the inlet of the dust collector.
The following describes how to set the dust cover of the application of central dust collector:
First, the use of external dust exhaust cover, in the lower part of the cover as far as possible to install enclosures to reduce the scope of dust suction.
Second, the setting of the dust collector can not hinder the operation and maintenance.
3. The dust containing air flow controlled by the dust collecting hood does not pass through the operator's breathing zone.
4. If conditions permit, a closed cover should be used as far as possible to separate the dust from the operator and limit it to a local area.
5. When installing the receiving external dust exhaust cover, the direction of vacuuming should be consistent with the direction of dust particle ejection.
6. When setting the external dust exhaust cover, the cover mouth should be as close as possible to the place where the dust occurs.
The application of central dust collector is composed of air inlet pipe, air exhaust pipe, box, ash hopper, ash cleaning device, diversion device, air distribution plate, filter cartridge and electronic control device, similar to the air box pulse bag dust collection structure. The layout of the application of central dust collector is very important. It can be arranged vertically on the box flower plate or tilted on the flower plate. The vertical layout is more correct from the ash cleaning effect. The lower part of the flower plate is the filter chamber, and the upper part is the air box pulse chamber. An air flow distribution plate is arranged at the inlet of the dust collector.
dust collector is widely used in cement, steel, power, food, metallurgy, chemical and other industrial areas, the overall capacity increased several times, becoming a filter area > 2000m2 large dust collector (GB6719-86 class), It is a solution to solve the problem of the old-fashioned dust collector, which is difficult to collect dust, the filter wind speed is good, the dust cleaning effect is poor, the filter bag is easy to wear and leak, and the operation cost is not low. Compared with the existing bag type and electrostatic precipitator on the market, it has the characteristics of large filter area, low pressure difference, low emission, small volume, good service life, etc., which has become the new direction of the development of industrial dust collector.
application of central dust collector https://www.kaisenfilter.com/Central-Dust-Collector
4g vehicle gps tracker why can't set the location?
A: Xiaobian consulted the colleagues related to after-sales, and summarized that there may be the following reasons:
1, the most likely is that gps broke down
The antenna is broken, the GSM module is faulty, or the GPS module sensitivity is reduced and cannot be located, etc. All belong to the 4g vehicle gps tracker itself, and it is necessary to judge whether it is broken.
The mobile phone card (SIM card) of the 2, 4G vehicle gps tracker is overdue or the mobile phone is not enabled with GPRS function and so on
Consult the operator of the mobile phone card for details, consult whether the mobile phone card is overdue, whether the Internet function is opened, whether the Internet function is effective, and whether the package has been changed. If it is a mobile phone card, be sure to open GPRS.
The 3, 4G vehicle gps tracker is in a signal dead zone with no signal
Call the mobile phone number on the 4g vehicle gps tracker through the mobile phone, if the prompt can not be connected, not in the service area, this is the case.
4, if it is connected to the linear 4g vehicle gps tracker, it may also be caused by improper installation position
The installation position of the locator can not be too closed, do not have a metal product, so that the equipment is not able to accept the GPS signal sent by the satellite, and the installation position in the car is as close as possible.
4g vehicle gps tracker can not determine the location, you still need to investigate according to their own situation. If you have any questions, you can also consult the online after-sales customer service of mobile communication.
4g vehicle gps tracker https://www.eelinktracker.com/news/the-reason-why-we-need-4g-gps-tracker-not-2g-3g-gps-tracker.html
79055-62-6 is a strong oxide, do not contact with combustibles, can fuel the fire, and easily oxidized material contact can fierce internal reaction, cause combustion or explosive capacity. It's not deliquescent in the air.
Can be used in glass tin cans or buckets, placed containers must be damaged. Store in a cool and dry place. In particular, it must be isolated from combustible materials, organic matter or other readily oxidized substances. Avoid storing on wooden floors.
Any spilled or spilled material must be removed immediately. Repeatedly wash the polluted ground with water and wipe it with a wet cloth to avoid burning of organic matter such as paper, wood and fiber after drying.
You can extinguish the fire with water when it starts burning. If the fire site has a large number of 79055-62-6, heat melting, water will produce splash, must prevent burn.
79055-62-6 https://www.clentpharma.com/Acetoxyacetyl-chloride.html